README File for Scalable Screen Fonts for ATM

WHAT IS INCLUDED IN THIS PACKAGE
--------------------------------
The diskettes in this package contain scalable Type 1 font files
for use with Adobe Type Manager (ATM) in Windows or OS/2.
The diskettes contain Type 1 screen fonts for all 39 fonts
that are resident in your printer.  Disk 1 contains 17 fonts and
Disk 2 contains 22 fonts.

REQUIREMENTS FOR INSTALLATION
-----------------------------
To use these screen fonts, you must have Adobe Type Manager (ATM)
installed on your system. To install these Type 1 screen fonts,
the printer Toolkit program MUST be installed on your hard drive.
The Installation Utilities diskettes that contain the Toolkit program
were provided with your printer. The Toolkit should normally be
installed when you run the Printer Setup Utility, but you can also
use the instructions below (under the heading WHAT TO DO IF THE
TOOLKIT MESSAGE APPEARS) to install the Toolkit.

INSTALLATION OF THE SCREEN FONTS
--------------------------------
1. For DOS or OS/2, insert Disk 1 in drive A. Type A:\INSTALL
   and press Enter. For OS/2, make sure you run INSTALL in an
   OS/2 window.

   The Toolkit program should appear on your screen. If you
   received the message " The Printer Toolkit was not found on
   your system ....," follow the steps in the next section.

2. For each diskette, do the following:
   a. For DOS, select the Fonts menu and choose Install Resident Screen Fonts.
      For OS/2, choose Install Screen Fonts.
   b. Follow the directions on the screen to install the screen fonts.

WHAT TO DO IF THE TOOLKIT MESSAGE APPEARS
-----------------------------------------
If you received the message "The Printer Toolkit was not found on your
system ...," you must install the latest Toolkit program on your hard
drive to install these screen fonts on your system. The Toolkit program
was included on the Setup Disk that came with your printer.

NOTE: You must install the Toolkit program on your hard drive
      before you install screen fonts. You cannot use the Toolkit
      program directly from the Installation Utilities diskette. The
      Toolkit program should have been installed when you ran the
      Printer Setup Utility.

Follow the instructions below to use the Toolkit program to install Type 1
screen fonts on your system for DOS:

1.  Install the Toolkit on your hard drive.
    System requirements to install the Toolkit:
    PC-DOS or MS-DOS versions 5.0 or higher; IBM OS/2 versions 1.30.2 or
    higher; IBM or 100%-compatible PC or PS/2 with hard drive; one high
    density 3.5" 1.44MB diskette drive; 380KB of free memory; 1MB of
    free hard drive space without MarkVision installed, or 2MB of free
    hard drive space with MarkVision installed, for the program and
    its supporting files.
    a. Use the Printer Setup utility to install the Toolkit. Insert
       the Setup Disk that came with your printer in drive A
       and type A:SETUP
    b. Choose Express installation and skip Application Search to get
        to the Install Printer Toolkit screen.
    c. Follow the instructions on the screen to install the Toolkit.
    d. Exit Setup after the Toolkit has been installed.

2. Reboot your computer to make the Toolkit available.
3. Type TOOLKIT at a DOS prompt, open the Fonts menu, and select
    Install Resident Screen Fonts. Follow the directions on your screen.

For OS/2:

1. Make sure the Tookit is installed on your system. A Printer Toolkit
   icon should be shown in your Main group or folder if it is installed.
   If it is not, use the Printer Setup Utility to install the Toolkit
   program. Run A:\SETUP from the Setup Disk and choose Custom Install
   to install the Toolkit on your hard drive.
2. If the Toolkit is already installed, the message "The Printer's
   Toolkit was not found on your system ..." occurred because you
   installed the Toolkit on a drive and path other than the default
   C:\PRTxxxx. You need to update your path in CONFIG.SYS with the
   drive and path where your Toolkit resides.

   Otherwise, if you installed the Toolkit in OS/2 using the Printer
   Setup Utility, just double click on the Printer Toolkit icon in
   your Main group on your desk top and choose Install Screen Fonts from
   the main Toolkit screen. Follow the directions on your screen to
   install the screen fonts in this package.

WHAT TO DO IF YOU DO NOT HAVE THE PRINTER'S TOOLKIT PROGRAM
-----------------------------------------------------------
Contact your point of purchase to obtain the printer Installation Utilities,
including the Toolkit program.

The screen fonts in this package may be installed on all computers that
share your printer.
